Watch the clip below to see a demonstration of how any camera can be turned into an intelligent motion detector through the use of video analytics.

There are many options for adding video analytics to an existing camera system… and when done appropriately, basic analytics can significantly improve the level of security offered by a CCTV system.

Some of the scenarios where we have installed video analytics for our clients include:

• to detect someone walking in an area of their yard (veering off of the main path) that they are not supposed to be;
• to send an alarm if someone is standing too close to the front of a store window/front door after hours;
• to alert security guards about someone in a parkade during specific hours;
• to count the number of people coming into (and out of) a store during the day;

In the case of burglary prevention, getting an early warning about someone trespassing makes a huge difference for our response teams. Now, rather than waiting for a detector in the house to trip, we can receive an alarm signal while a potential burglar is still outside.

While our response team is enroute, our monitoring team in our Operations Centre is able to keep an eye on exactly what is happening and help coordinate both our own response as well as get the Police involved as quickly as possible if required.

We’ve got everything set-up and installed in our Kerrisdale showroom. If you have any interest in learning more about when/where CCTV may be appropriate for you, please stop by and get a demonstration.

Given that the majority of our new clients come to us AFTER they’ve been the victim of a burglary (and learned that the security they thought they had in place didn’t work as expected), we recently launched a new website at AreYouPayingEnough.com to help get people to think about their home security proactively.

We built the site to point out the differences between Provident Security and every other provider. The most important of which is the fact that Provident is the only company that guarantees to be at your door within five minutes.

One of the key elements in our ability to provide immediate response is that we own and operate our own central monitoring station in Kerrisdale. Because we monitor our own alarms, we are able to control every single step in our process… from the alarm being tripped in your home all the way through to our response team member arriving at your door within five minutes.

We filmed a few different videos for the site, including the one below which takes you on a quick tour of our 24/7 Kerrisdale Operations Centre… you can view the other clips on the AreYouPayingEnough site…

As stated in the video, we lead regular tours through our Operations Centre and we’d be happy to show you around. The best time to come for a tour is after one of our regular Preventing Burglary seminars. The seminars are held in our Kerrisdale showroom and afterwards we lead a tour through our Operations Centre so that you can see exactly what happens behind the scenes at Provident. The next seminar is on June 22, you can RSVP by clicking here.

If that date doesn’t work for you, please give us a call at 604.664.1087 or just drop by at 2309 West 41st Avenue anytime… we’d be happy to show you around.

Our next ‘Preventing Burglary’ seminar will be held on Thursday, May 27th in our Kerrisdale Showroom…

Come by anytime after 6:30pm for some wine and Benton Brothers cheese … the presentation will start promptly at 7:00pm and will last about an hour. Afterwards, we’ll lead a tour of our 24/7 Operations Centre for anyone who is interested.

This seminar always fills up… and a common comment that we get afterwards from attendees is that the presentation was ‘much more entertaining than I thought’.

A shocking but true fact that we have learned: people assume that a home security seminar will be dry, boring and/or a sales pitch.

Ours is none of those things.

Come by on the 27th and we guarantee that you will leave with some new information that you can put to immediate use to improve the security of your home. Much of what is discussed are tools/tricks that are either free or very inexpensive… you do not need to be a Provident client, or even an alarm owner, to get value from attending.

Home security does not have to be boring.

We hope to see you on the 27th to prove it!

As of today, we’ve got 30 21 15 seats left… please RSVP by clicking here

The NY Times printed an article by Paul Sullivan on Saturday called ‘Weighing the Value of a Home Alarm System‘.

In the article, Sullivan points out one of the central tenets of this blog over the past six years… that the most important reason for paying for a monitored alarm is to generate an immediate response.

Sullivan argues that given a very high false alarm rate (he suggests 80% of alarms are false – although my experience puts that figure much closer to 98%) most Police departments cannot, or will not, provide priority response.

His article should give a lot of people reason to question the ‘value’ that they are receiving from their alarm.

Unfortunately, for the vast majority of alarm owners, the reality is even worse than what Sullivan describes.

Sullivan’s article is focused on the following five major points:

1. Issues with power failures;
2. Slow Police response times;
3. Insurance Discounts
4. Deterrent value is outweighed by cost of an alarm
5. Getting more than just burglary detection from an alarm

[This post addresses the first two points above... I'll post my comments on the last three issues later this week.]

Sullivan is correct in all of his criticisms about how most alarms work. However, not all companies handle these common issues in the same way.

Here are my thoughts on each of his points…

POWER FAILURES: “People may be surprised to learn that when they most need their security system to protect their house, they oftentimes cannot rely on it. Jackie Ostrander discovered that when a storm knocked out power to her home in Greenwich, Conn., for a week in March — too long for her backup battery to keep going. And it took her security company three weeks to restart her system.”

Virtually every alarm system on the market has the ability to communicate that power has been lost as well as if the back-up battery is low.

At Provident, we set-up all of our clients’ alarms to send every possible signal, not just alarms. As a result, as soon as power is interrupted, we receive a signal from each of our affected clients. Once the back-up battery starts to get low (after approximately 6-8 hours on most alarms that we’ve installed) the alarm will send us another signal.

At that point, we will attempt to contact our client to confirm that they are home and ask if they would like to replace the battery and/or implement additional security measures (such as mobile patrols or posting a guard) while the power is out. If we cannot get a hold of them, we will respond to the home and replace the back-up battery.

Most of our clients have standing instructions with us telling us what to do in the event that we cannot reach them.

The ‘power failure’ issue is really a ‘response issue’ and can be easily solved.

POLICE RESPONSE TIMES: “There are about 36 million security systems in the United States, half of them in homes. Revenue for the industry was $28.2 billion in 2009, according to the Installation Business Report, an annual security industry survey. So a lot of people apparently think their homes are going to be impervious to burglars.

But even when the systems are working properly, the police response times can be slow.

Stan Martin, executive director of the Security Industry Alarm Coalition, acknowledged as much. He said that in big cities like New York, Atlanta and Chicago, police could take 30 to 45 minutes to respond, while in smaller towns the best that could be hoped for was six to eight minutes.”

The truth is that in many cities, large and small, Police Departments are making the decision to not respond at all. For example, Police do not respond in Whistler, Salt Lake City or Fremont, California. Other cities, like Seattle, have implemented a misleadingly titled program called ‘Enhanced Call Verification‘.

Of those Police Departments that still respond, the response time is often far longer than just “30-45 minutes”. In Vancouver, the latest Patrol Deployment study showed that the average Police response time to an alarm is 2 hours and 6 minutes.

Sullivan goes on to point out that even when the Police do respond, it’s hardly a complete ‘service’…

“To combat false alarms, many police departments charge after the first or second one, he [Martin] said. In Stamford, Conn., for instance, the cost is $75. Yet these fines are often levied when a police car just drives past your house, not even pulling in the driveway, let alone walking around the property.”

The fact is that the alarm industry has gotten away with providing an incomplete service for a very long time. What other industry is able to sell a service that relies on a government agency in order to provide any value?  The alarm industry is very much a parasite on the Police … at least the traditional model of delivering alarm ‘service’ certainly is.

The most important  reason for paying for alarm monitoring is to generate an immediate response. That’s it. An alarm provides information that has an incredibly short shelf life in order to be of any value.

If the alarm signal being received is a ‘low battery’, what can the Police do about it? In many cases, the Police do not even know that the alarm they are responding to was a battery issue rather than an actual burglary signal.

The Police do not hold house keys and often do not know what exactly is ‘in alarm’… they just get told that there is an ‘alarm’.

Click below to watch a video clip from one of our home security seminars where I explain how Police response actually works… and why any incident is most likely long over before the Police even first hear of an alarm, let alone get a chance to start responding to it.

This is why at Provident, we do not make any verification calls.

When an alarm trips, we send our response teams to provide immediate response. We hold keys and we know exactly what the alarm is reporting… and what to do to correct it. If the Police are required, we call 911 from the site and report a crime in progress… a call that results in very fast Police response.

We guarantee a five minute response, but we also work to educate our clients than a security alarm is NOT a security ‘system’. An alarm is one part of your overall ‘system’ and should not be relied on as a stand-alone security tactic. As far as effective security tactics go, nothing beats Five Minute Proofing.

Without effective ‘Five Minute Proofing’ in place, an alarm is unlikely to provide any real value in minimizing loss during a burglary. The good news? Many Five Minute Proofing strategies are either free or very low cost.

Click below to hear more about Five Minute Proofing…

INSURANCE DISCOUNTS, DETERRENT VALUE and GOING BEYOND SECURITY…

This post seemed like it was going to be far too long. Definitely too long for a single post. If you’re still reading this far down the page… Thank you.

I’ll post the balance of my thoughts on the points Sullivan raised  later this week.

Just about every media outlet in North America has already reported on the burglary at one of Eli Lilly & Co.’s Connecticut warehouses this past weekend (here are the Wall Street Journal, NY Times and over 1,000 other versions). Most of the reports have focused on the fact that the crooks were able to get away with more than $75 million in prescription drugs, making it one of the biggest pharmaceutical heists in history.

The crooks gained entry to the warehouse by cutting a hole in the roof and then rappelling down into the warehouse. According to an ABC News report on the incident, once the crooks were inside they disabled the alarm and spent a couple hours loading pallets of drugs into at least one truck in the loading bay.

Here’s a video from a Hartford News station that explains what happened…

Click here to view the embedded video.

Other than the fact that that is an amazing amount of Prozac for someone to try to sell, the most interesting part of this story (for me at least) is the fact that the security failed so miserably.

Dan Gelinas is a journalist at Security Systems News and has been posting on his blog about the security angle in this story.

He’s chased down the Enfield, Connecticut Police Department and confirmed that they never received any request for dispatch from the warehouse’s alarm company.

From everything that’s been reported so far, it appears that the alarm system either did not work or, if it did, the alarm signals were ignored. Either way, whatever happened, it shouldn’t have… a properly designed security system would have detected the burglary and made a multi-hour heist impossible.

The incident is reminiscent of the 2008 heist at the UBC Museum of Anthropology where crooks got inside and stole fifteen priceless Bill Reid pieces of art, without triggering any kind of security or Police response. In that case, the Museum tried to suggest that, despite the theft, their security was working. I wrote about the incident in a couple blog posts here and here and outlined why I thought that was a crazy statement to make.

Here’s a video clip from Global TV in Vancouver about that burglary (I talk about  some of the ways that artwork, or anything, can be protected at the 2:43 mark).

Click here to view the embedded video.

In the Museum’s case, the final story ended up being that the crooks were able to circumvent all of the security technology by simply calling ahead and asking for any alarm signals to be ignored. Seriously.

There are a few security measures that should have been in place to prevent either of these incidents from happening…

Your security is in your redundancy…

Whether you are protecting your home, a corner store or a warehouse where you have $75 million dollars worth of Prozac, you cannot afford to have a single point of failure.

Your security is in your redundancy. That means that you need to have multiple lines of detection: contacts on every door and window, glassbreak sensors, motion detectors and shock sensors are required throughout.

Most importantly, an alarm should not rely on a single form of communication. If the only way that an alarm sends a signal is over the telephone lines, and that phone line gets cut (or unplugged from the inside) the alarm will not communicate.

At Provident, we use BLINK mesh radio to provide an almost instantaneous wireless signal to be sent for every alarm in our client’s homes and businesses. We use the telephone line as a back-up communication method which ensures that we receive every alarm signal twice… and if a crook cuts a phone line, it will not have any impact on the alarm’s ability to send a signal.

Protection against system tampering…

As just one example, many options exist for motion detectors that are equipped with ‘anti-masking’ technology which detects attempts to block a motion detector with spray paint, or anything. Here’s an example of one detector from Honeywell that will prevent tampering.

Similarly, options exist for almost every type of device (and the wiring) to be protected against tampering.

Ensuring that there is no single point of failure… and not relying on a single detector for any one area… will also significantly increase security.

Regular testing of the alarm… where every single device is inspected and tripped will also reduce your risk.

Protection against an inside job…

Just because a burglar has a little help from the inside (or if the burglar is already an insider) there is no need to make it any easier for them to steal your stuff.

To start with, every person who uses your alarm should have their own, unique, alarm code. If you have a housekeeper who only works on Wednesdays, or daytime staff in your office who should never need to be at work at 2:00am, their alarm codes should restrict them to the times that they are allowed to access your property.

The vast majority of alarms are capable of restricting users access by time of day. Why give out 24 hour access if it’s not required.

I’ve written a few posts on this topic, including…

Fresh Milk and Why Your Alarm Should Not Share

Your alarm should not share

Protection against forgetfulness…

The fact that an alarm user has forgotten to arm the alarm in your store or office by accident, or on purpose, does not need to result in your belongings being left unmonitored and ready for easy pick-up by crooks.

Every alarm company offers a service called ‘Supervision’ which means that if your alarm is not set by a certain time each day, a signal is sent to our Operations Centre to be followed up on.

We provide this service to many of our clients to ensure that closing staff have locked up and armed the alarm by a certain time each night. Likewise, if the alarm hasn’t been disarmed by a certain time in the morning (meaning that noone has opened the store yet) that will also create an alarm signal in our Operations Centre.

Either way, you’re protected against human error that could leave you unprotected.

I wrote about this service in a post about Lindsay Lohan’s burglary last year.

Five minute proofing…

The most effective tactic that you can use to minimize your risk of being a victim of burglary is to five-minute proof your important belongings.

In the Eli Lilly case, even one-hour proofing looks like it would’ve worked.

Five-minute proofing is the culmination of many different security tactics where the goal is to ensure that from the point at which the alarm is tripped, it would take a crook at least five minutes to get to your most precious belongings.

The first step to successful five-minute proofing is to push your alarm detection out as far as possible… ideally, you want to detect the crook while he is still on the outside, rather than waiting for him to get inside.

In the Eli Lilly case, video cameras using video analytics… or even outdoor beams installed on the roof could have offered an early warning about what was going on.

It will be interesting to hear the rest of the story about what actually happened in Connecticut as details are released.

Fox 12 in Portland reported a story today about a pair of burglars who Police believe may be posing as door-to-door Window Salesmen.

The video clip of the story implies that the impostors never got inside of the victim’s home, but a couple of days after their visit, a Portland homeowner had his safe targeted in a burglary.

Irrespective of who actually committed the burglary, the notable part of the story was the fact that the victim was keeping $13,000.00 cash in a safe that he had bolted down in his master bedroom closet.

Here’s an excerpt from the story…

On Tuesday, Lee said he found his home trashed. Thieves stole rare coins, jewelry and $13,000 from his safe. Lee said the burglars broke in through a door and used tools from his garage to break into his safe.

“I had it bolted to the floor,” he said. “Evidently, it wasn’t as safe as I thought it was.”

There are few lessons from this story… the first two are the same as in my post about the Apple Store in New Jersey getting emptied in 31 seconds:

(1) You CANNOT make it physically impossible for someone to break in; and

(2) Five-Minute Proofing is the most important security tactic.

Of course, the most fundamental lesson is that you should not keep large amounts of cash in your home… put it in the bank. If you decide that you want to keep cash at home, by all means, put it in a safe and bolt it down. But, if you do not have a monitored alarm that will alert responders that someone is trying to get at your safe… they can take as much time as it takes to remove it.

The time that it takes to remove a safe is a lot less than most people think. Safes, even really, really heavy safes, are only difficult to move around when you are trying to be careful not to damage the walls (or anything else). If you don’t care about making a mess or breaking anything, moving a safe isn’t that hard. Just ask Lindsay Lohan.

Relying on a safe, just like relying on an alarm, often provides a false sense of security. Your security is in your redundancy. It’s all about putting multiple steps/tactics/measures in place.

If you have a safe, but do not have it monitored, you might want to think about how important the things that you have inside of it are. You might be better off spreading your valuables all over your home rather than keeping them all together in one easily movable box.

SIDE NOTE: In the video, the reporter mentions that the homeowner thinks that the impostors were looking for “window burglar alarm tape” on the windows. That’s fairly unlikely given that foil is rarely part of an alarm system that has been installed in the past 25 years.

If they were looking at the windows, it’s much more likely that they were simply looking through them in order to see if there was anything of obvious value that was easily reachable inside.

If they were savvy enough to look for alarm equipment, they would have simply cut the telephone lines.

Police in Marlton, New Jersey are looking for five suspects that broke into an Apple Store and made off with a few dozen Macbooks.

Click below to watch a news clip showing the brazen smash & grab that took just 31 seconds for the thieves to clean the store out of almost every display model.

Although the store had a Security Guard on duty, the crooks were able to smash the front glass doors and each took an ‘aisle’ in the store to grab every MacBook on display. Apparently, one of the crooks motioned to the Guard that he had a gun… forcing the Guard to back-off and not try to intervene at all.

As pointed out by the (incredibly annoying) reporter in the newsstory, the CCTV system in the store did not offer any deterrent value as the thieves simply covered their faces while they were in sight of the cameras.

Beyond the reminder that a CCTV system is not a deterrent, this smash & grab offers a few lessons:

1. You cannot make it physically impossible for someone to break in

If someone wants to try and break into your home or business, there is very little that you can do to make it physically impossible. If they want in, they’ll get in eventually. The trick is to put appropriate security measures in place that help make it easy for a potential burglar to make a decision not to bother with your place.

If you have a full-time security guard, extensive camera system or a big dog in your house, if a crook decides that he wants to try to get in anyways… he will. It’s the combination of the appropriate security measures that provide real security.

Your goal is to create enough perceived hassle for a crook that they make up their own mind that your store, or home, is not worth the effort.

2. Five-Minute Proofing is the most important security tactic

Five-Minute Proofing is the single most effective security tactic that you can implement in your home or business. Simply put, Five-Minute Proofing means that you ensure that, from the point at which the alarm is tripped, it would take a crook at least five minutes to get to what you are trying to protect.

In the case of this particular Apple Store, the store should have been equipped with glassbreak detectors near the front doors. More importantly, the glass panels themselves should have been laminated glass… or at least had security film on them, so that they wouldn’t smash so easily.

That way, when the crooks made their first attempt to smash the glass, the glassbreak detectors (if they were installed correctly) would hear the sound of the glass being attacked and trip the alarm. Alternatively, the camera system could have been set-up to trip an alarm due to someone standing at the front door for too long after-hours.

By designing the alarm to trip while the crooks are still outside, the Police could have been immediately called by the Security Guard to report what was happening and the alarm monitoring company would also be immediately able to assist. If the alarm monitoring company were monitoring the camera system, they could also relay the suspects exact descriptions, in real time, to the Police.

Beyond the front glass, there should be a second layer of physical security inside the store to help slow the crooks down. Expanding gates are often used for this purpose and are best installed several feet away from the front of the store. That way, if the crooks were able to eventually break through the glass to get in the store, they would then need to contend with getting around the expanding gates. Your security is in your redundancy.

Going a step further, each of the MacBooks could easily be locked down… not to make them impossible to steal, but ensuring that noone could simply grab a couple dozen of them in half a minute.

It’s not about making it physically impossible to get in… it’s about putting enough impediments into a potential crooks’ way that he is (or they are) unable to get to your valuables quickly.

If those three (the alarm, laminated glass and an expanding gate) Five Minute Proofing measures had been in place in this particular Apple Store, both the Security Guard and Alarm Monitoring company would have had a reasonable chance to call 911 and report a crime in progress.

The store would have had a damaged front door, but they would not have risked the safety of the security guard or had to worry about five crooks who learned how easy it is to break into their store and clean them out.

Click the video below to watch an excerpt from a recent ‘Preventing Burglary’ seminar where I explain Five Minute Proofing and give a few other examples.

Channel 4 Action News in Pittsburgh ran a story last night about a burglary attempt in West Deer that was thwarted by a 10 year old boy.

The burglar ended up being 21 year old Brett Kreider, who lives in the same neighbourhood, who is now a suspect in 8 recent burglaries. As is often the case with most burglars, the accused burglar had just gotten out of jail… for burglary.

The M.O. of the burglar is almost exactly as I’ve laid out in previous posts about how the typical residential burglary happens… the fact that it ended up being a single person responsible for a ‘rash’ of burglaries is also typical.

Here are a few quotes from the story… (you can read the full story here)

The intruder ignored a dog, but when a 10-year-old boy spotted him and yelled at him to get out, he fled the scene.

[Police Chief Joe] Lape said the burglar had already broken into two other homes in the same neighborhood that day.Investigators said the burglar, who operates in broad daylight, usually takes pills, money, weapons and anything else of value that is easily carried away. He has also taken a truck from one of the eight homes police believe he’s burglarized

The really important lesson in the story, comes next…

Police said on one occasion the burglar knocked on a front door to see if anyone was home. When the door was answered, the burglar said he was looking for a dog and walked away.

This is what happens in almost every single burglary… before breaking in, the crook will first knock on the door to check if someone is home. If anyone answers, the crook will make up a quick story about why they are there and leave as quickly as possible.

The vast majority of burglars are not violent and are not looking for drama… if they were, they’d be robbing a bank or holding up a convenience store instead.

The most important advice about home security that you can give your kids, nannies, housekeepers or other people in your home is to NEVER IGNORE THE DOOR.

If someone knocks on your door, you should always let them know that someone is inside. Don’t open the door, but talk through it to let them know that the house is not empty. If you believe that the person at the door is in any way suspicious, call 911. If you live in Vancouver, you can also call us at 604.664.1087.

Barking dogs are rarely the deterrent that people think that they are. The fact is that most house pets, despite a good bark, are still house pets… and a motivated burglar can get by them without too much hassle. A human being, on the other hand, is almost always more trouble than they are worth… even if they are only 10 years old. In almost every case, a potential witness is far too much hassle and the potential crook will move on to the next unoccupied home.

I’ve written on this topic before on this blog back in 2006 with a post titled Answer the Door and another one in April after a Delta teenager ended up having to call 911 from a bedroom closet after a burglar had broken into her home after she ignored the knocking at the door.

Reuters reported on Monday that Lindsay Lohan was the victim of a second burglary in less than 3 months in her Hollywood Hills home.

Apparently, the most recent burglary was discovered around 3am when Lohan came home to find her safe ripped out of a wall. Lohan’s father suggested the burglary was an inside job due to the fact that the alarm had not been armed by a member of her house staff.

Whether it was an inside job or not, leaving/forgetting to arm your alarm can create a major risk. However, if you are relying on other people to arm your alarm system in your home or business, there are a few things that you can do to minimize the risk of someone forgetting… or forgetting on purpose.

1. Partition your alarm system

Most alarm systems are capable of having at least a couple different ‘partitions’. A partition is a group of zones that can be armed/disarmed independently of other groups of zones (ie. other partitions). Most often, we use this feature to separate a basement suite or garage from the main house…. or a Manager’s office from the rest of a retail store.

In cases where clients have staff working in their homes, particularly when they are not home themselves, sensitive areas such as a home office, master bedroom closet, wine cellar or other similar areas can be armed independently. If a safe has been installed, we can either arm the safe itself, or the closet/room that it is installed in, to it’s own partition. This way, even if the main house alarm is not set, the safe is always armed and will trigger a response anytime that access is attempted. (For more details about security for your safe, click here.)

If it’s artwork that you need to protect, we can install sensors that will trip the alarm (with or without a siren) anytime that a painting, sculpture or anything else you’d like to protect gets moved… whether or not the rest of the alarm system is armed.

I discussed how we use this technology to look after paintings in a Global TV News story that was filmed after the UBC Museum of Anthropology was broken into last year. Click on the link below to watch a 50 second excerpt from that clip. (You can watch the entire clip here.)

Click here to view the embedded video.

2. Set up ‘Supervised’ Openings & Closings

In commercial applications, Provident provides ‘supervision’ of the arming and disarming of client’s alarm systems.

The way this service works is that different staff members are assigned different permissions in our monitoring software. For example, while a business owner will be allowed to arm or disarm their business at anytime of the day or night that they please, a junior staff person may only be allowed to use their code between 8:30am and 7:00pm on weekdays. In the event that they attempt to use their code outside of those hours, we can either (1) program the alarm to simply deny access; or (2) allow access and send a silent alarm to the business owner to follow-up.

This service is also used to ensure that an alarm has been armed by a certain time. For example, if the last person out of your business typically leaves by 8:30pm, we can create an alarm that will automatically trip in the event that the alarm has not been armed by 9:00pm. If someone has forgotten to arm the system, we can either respond in person or remotely arm the alarm for you. Either way, the alarm is not left disarmed all night long.

]]> http://www.providentsecurity.ca/blog/2009/08/what-lindsay-lohan-can-teach-you-about-home-security.html/feed/ 1 http://www.providentsecurity.ca/blog/2009/05/provident-securitys-preventing-burglary-seminar-on-may-20th-will-be-livestreamed.html http://www.providentsecurity.ca/blog/2009/05/provident-securitys-preventing-burglary-seminar-on-may-20th-will-be-livestreamed.html#comments Sat, 16 May 2009 20:10:58 +0000 mjagger http://www.providentsecurity.ca/blog/?p=677

Community Security TV will go live on May 20th at 7:00pm…

As each of our past seminars has quickly sold out, we’ll be trying something new on the 20th… we’ll be streaming the entire seminar live on the internet. If you’d like to watch from home, or wherever you are, click here to watch. Not only will you be able to watch and listen to the entire seminar, you can also ask questions using the ‘chat room’ feature.

There is no need to register or login to watch the seminar, but if you would like to be able to use the chat feature and ask any questions, you will need to have a UStream.tv username & password which you can get by going to www.ustream.tv and clicking on the ‘signup’ link at the top of the page

Either in person, or on the internet, we hope that you can attend on May 20th.

Click here if you would like to attend in person… we’ve still got a few seats left.

Today, CBC reported about a disturbing sexual assault that happened when a man entered a home in Coquitlam around 3:30am and assaulted a 12-year-old girl who was asleep in her bed.

In this case, the man was able to gain entry to the home through an unlocked door. Luckily, the girl was able to fight the intruder off and scream for help.

This story reminded me of an incident in Kitsilano in 2006 where a very similar crime was committed.

While these types of incidents are not regular occurrences… they do raise the issue of how to best secure your home while you and your family are in it… especially while you are sleeping.

Beyond the obvious advice of ensuring that all of your doors and windows are locked, here are a few other things to consider:

Arm your alarm in STAY mode when you go to bed

With most alarms, certainly with each one that we install, there are several ‘modes’ that you can arm it in.

AWAY mode tells the alarm that you would like to arm every single device in your home, whereas STAY mode tells it to arm only specific zones. While the default programming is to make STAY mode arm all perimeter devices (typically all of the door and window contacts), we can program STAY mode to be anything you would like.

For example, we can program STAY mode to arm all of the perimeter devices as well as glassbreak sensors and motion detectors in the basement and certain areas of the home.

This allows you to arm your alarm, but walk around in your home without setting it off.

Your alarm system can only offer value if it is armed.

Ensure that you have portable telephones easily accessible

In the event of any type of emergency, it’s incredibly important to be able to call for help as quickly as possible.

While having a cellular phone is good, having portable telephones that use your landline (that are fully charged) offer the added benefit of providing Caller ID information to the 911 call centre so that even if you are unable to speak, they know what address to respond to.

Your security is in your redundancy… in the event that your phone lines are cut, a cellular phone is an important back-up measure.

Consider keeping your cellular phone charger in your bedroom (rather than downstairs in the kitchen) so that your phone is always charged and sitting on your nightstand.

Remember that home safety is much more than burglary detection

While these types of incidents cause a lot of fear, the reality is that the frequency of incidents like these are very rare.

A much more likely scenario is accidentally leaving something on the stove or something else that causes a fire to start. How old are your smoke detectors? Do you have monitored smoke detectors outside of each bedroom in your house?

A 14 year old in Delta is being commended for both keeping calm and acting quickly to help the Police catch a burglar in her home.

The teen was home alone when she heard someone at the front door… she ignored the knocking and ended up having to hide in the closet to call 911 while the crook went through the house – including into the room where she was hiding.

This story is only the latest example of why it is so important to always answer the door… without actually opening it.

Almost every burglar will first knock on the door to try and determine if someone is home… if they think it’s empty, they’ll break in.

If you have young children, babysitters, nannies or other people in your home, it is very important that they be told to always let the person at the door know that someone is home… but that they just can’t get to the door. At the very least, turn a light on so that a potential crook knows that the house isn’t empty.

If the person at the door doesn’t leave, call 911 immediately to report the incident… if you live West of Oak Street, you can also give us a call at 604.664.1087 and we’ll be happy to come by to check things out.

Click here to read about another similar case in Ohio last year.